Tags: Projects & Engineering

Senior Contracts Engineer

- Thursday, May 21, 2015

Senior Contracts Engineer

Abu Dhabi, UAE

Basic Function:

• Plans, supervises and controls a day-to-day activities of Drilling Contracts Section including: following up the Drilling Division contracts validity, available funds and performance.

• Participates in reviewing the Scope of Work, strategy for new tenders and technical evaluation of the submitted offers.

• Participates in conducting special studies and task forces related to Drilling Division contracts process and follows up meetings. 

• Coordinates with Commercial Division and Finance Division to resolve any contractual problems.

Worked Performed:

• Directs and supervises the activities of assigned personnel In the section. Includes determining priorities, allocating work assignments etc. Performs supervisor functions and assumes responsibilities at Section Head level as established by leadership Team

• Plans in advance to start issuing the official requisition (CR/CCR) through SAP System taking enough lead time prior to the expiry date of contracts for future approval by Management. Review (with Management) scope of work, contract strategy, objectives and invitation to Tender (ITI) for new tenders jointly with Drilling Job Officers and thereafter participating in technical evaluation of various submitted offers with Job Officers. Ensures all contracts are extended or tendered on target dates.

• Establishes adequate measures to monitoring contacts available funds and make necessary actions to ensure funds available throughout contract duration.

• Coordinates with Commercial Division (Contracts) actions required for resolving pending disputes and represent Drilling Division together with Drilling Job Officers in the preparation of the enquiry of new tenders. Participates in the negotiation meetings with Commercial Division Contracts Team and the Bidders.

• Follows up and co-ordinates the allocation of major contracted services on various Rigs/Locations on monthly basis.

• Defines and Implements key indicators to monitor contractor performance on quarterly basis. Issues contracts close out (end of contract performance evaluation) jointly with Job Officers) and puts forward recommendation for management directives. Ensures the proper implementation of contractual terms and conditions.

• Monitors all aspects of contracting process implemented by Commercial Division and provides recommendations for modifications/ improvement. Provides all technical and statistical support related to Drilling Contracts to all Drilling Teams. Provides advice and assistance in all matters related to upgrading and standardization of Drilling Contract documents for new contracts.

• Formulates, jointly with Job Officers, divisional standpoint in dispute/claim cases over interpretation and performance of drilling contracts and presents it officially to Contracts Division for action.

• Knows Company Health, Safety and Environment policy HSE procedures, regulations as they relate to his area of responsibility.

Minimum Requirements:

• Bachelor Degree in Petroleum or Mechanical Engineering or equivalent technical qualification.

• Minimum 8-9 years experience in drilling engineering & operations & services with sound knowledge of Drilling/Work over operations and Drilling Contracted Services.

• Very good knowledge of English.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Condition Monitoring Technician

- Tuesday, May 19, 2015

Condition Monitoring Technician

Habshan, Abu Dhabi, UAE

Basic Function:

• To Carries out condition monitoring of rotating equipment and steam traps and carries out performance tests and acceptance of rotary equipment.

Background:

The Condition Monitoring Technician A(HBM/RC1) Reports to Condition Monitoring Supervisor (HBM/RC).

The job incumbent performs the duty of data collection as per the routine daily schedule by using dedicated data collectors/analysers, Machinery Management system data acquisition units for rotating equipment and data collection for steam traps. Executing regular inspection, commissioning, and testing and acceptance procedure for rotating equipment. To identify abnormality by simple analysis of data and report to superiors. Carries out Baroscopic inspection on large rotary equipment like steam & gas turbines. Review all operating parameters and follow up action as advised. Carries out similar or related duties as assigned, such as assisting in, or carrying out modifications or the installation of new equipment and machinery, observing good housekeeping and work practices on-site and assisting during start-up and shut down of critical equipment as requested.

Worked Performed:

• To work as Rotating Equipment Inspector for acceptance after major overhaul of small, medium and large rotary equipment such as motors, pumps, fans, blowers, gearboxes, compressors, steam and gas turbines and turbo expanders. 

• To carry out daily inspection and predictive maintenance checks on rotating machinery such as compressors, pumps, gas and steam turbines, blowers, motors as defined by computer maintenance management system. (Maximo), attending other abnormalities being raised by Operations. 

• To performs Condition Monitoring by checking vibrations, temperatures and pressures, checking oils levels and flows reporting Condition Monitoring Supervisor where readings are outside tolerable limits. 

• To carry out Baroscopic inspection on large rotary equipment like steam & gas turbines and other rotating equipment when needed. 

• To steam traps mapping, surveillance, traps analysis and raising work orders & generate reports. 

• To daily review and checking of on line monitoring system (Bently Nevada Machinery Monitoring System, Machinery Condition Monitoring and Performance Monitoring) on critical machinery for abnormalities and reporting exceptions to Condition Monitoring Supervisor. Maintaining/ updating history of rotating equipment. 

• To checks that that routine maintenance of machinery and equipment is carried out as required by Maintenance Technicians to ensure smooth running of machinery and equipment. Determines if major equipment or sub-assemblies have to be removed to the workshop for major repairs or overhaul and follow up of equipment repair status. 

• To carry out inspection, counter check/acceptance of rotary equipment alignment, motor no load run performance at workshop and at site, commissioning and acceptance of rotary equipment after any repairs. Checks that required repairs, replacements and alignments are correctly carried out, and equipment after re-assembly in accordance with requirements. 

• To site acceptance of new equipment based on no load/ load run performance in the project. Releasing punch list for abnormalities of rotating equipment in the project, confirming punch list items after execution by contracts. 

• To operates computer terminal and associated auxiliary devices to perform condition monitoring and vibration checks, raising work orders for abnormalities in Computerized Maintenance Management System (Maximo) after reviewed/approved by Condition Monitoring Supervisor/ Rotating Equipment Section Head. 

Minimum Requirements:

• Adequate CMMMS knowledge - ISO Vibration Diagnostics Skills - Thermography survey condition monitoring - Online and Offline Condition Monitoring - Lube Oil Analysis.

• Technical Diploma / Related / minimum 5 years Experience - Electrical Gear Condition Monitoring - Ultrasound Surveys.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Mechanical Supervisor

-

Mechanical Supervisor

Abu Dhabi, UAE

Basic Function:

• Supervises Barge Mechanical activities on ZWSC, USSC and Wellhead Towers, along with all contractors workforce engaged in maintenance, installation, fabrication, modification and some other shutdown activities on ZWSC & USSC field's Super complexes.

Minimum Requirements:

• Bachelor Degree in Power Mechanical Engineering discipline or equivalent.

• 5 - 6 years' experience in  Oil & Gas offshore installations, maintenance and planning.

• Computer skills, excellent management with manpower.

• Proficient in English Language with good  communication skills.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Petroleum Engineer (Production Technology)

-

Petroleum  Engineer (Production Technology)

Abu Dhabi, UAE

Basic Function:

• Prepares overall schedule program for testing wells, bottom  hole surveys, wire line operations, well stimulation and  related Petroleum Engineering Operations.

• Monitors the performance and progress in implementation and recommends corrective measures to resolve operational difficulties. 

• Conducts short-term studies to improve the efficiency of production/injection operations.

Minimum Requirements:

• Bachelor Degree in Petroleum Engineering, Chemical Engineering discipline or equivalent.

• 5 - 6 years relevant experience of all aspects of Petroleum Engineering Operations.

• Very Good Knowledge of English.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Petroleum Engineer

-

Petroleum Engineer

Abu Dhabi, UAE

Basic Function:

• Supervises, coordinates and ensures that the various production logging operations requirements for Companies are carried out according to the Company's technical and safety standards. Prepares the monthly and yearly plan for production logging and cased-hole services.

• Monitors operations cost and verifies / endorses contractor's service tickets, evaluates technically contractors bids and recommends suitable ones. Coordinates and leads inspection team for the logging units prior to mobilisation to fields to ensure validation of Company's safety regulations and Engineering standards. 

• Ensures safety programme application by contractors.

Minimum Requirements:

• Bachelor Degree in Petroleum Engineering or equivalent.

• 5 years experience in petroleum engineering including logging and reservoir engineering.

• Very good knowledge of English Language.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Planning Engineer

-

Planning Engineer

Habshan, Abu Dhabi, UAE

Basic Function:

• To provide planning expertise for maintenance of plant equipment including major turn rounds and shutdowns and associated projects.

Background:

• Planning Engineer reports to Planning Section Head in the Engineering/Maintenance Department.

• The planning section is a focal point for supervising and controlling planning/scheduling activities for Rotating Equipment, Electrical /Control, Workshop & Static Equipment a etc. and to provides support to engineering sections.

• The Planning Section generates and issues PM Plans for Mechanical, Electrical, Control, Condition Monitoring, Fire & Gas, Vehicles, Heavy Lifts and Mobile Equipment. It has a vital role in planning, preparing, organizing and controlling the planned turnarounds, shutdowns, and maintenance of static and rotating equipment in the plant.

• The planner is a key person in these activities and is responsible for continuous improvement in day to day/shutdown cost effective planning/scheduling and providing support to engineering sections. It is a major challenge to maintain and improve efficiency of the NGL complex by a timely planning/scheduling and follow up of preventive and planned maintenance to avoid any unforeseen breakdown of plant equipment and keep the plant running in a safe manner.

Worked Performed:

• To review/issue daily Maintenance schedules and verify that the work orders received in Maximo from different areas have been scheduled according to their priorities and resources availability. ( 50- 80 work orders are handled on daily basis.)

• To prepare/issue 2-weekly planning schedule detailing schedule start and schedule finish date with tag numbers in MS-Projects graphics.

• To generate, issue and follow up of Preventive Maintenance Monthly Plan consisting of approximately 300 work orders for plant maintenance, and issue Monthly PM Reports.

• To monitor and analyze major shutdown activities status on daily basis, and emphasizing to schedule/execute critical work in central and area maintenance which could have impact on timely completion of turnaround.

• To comply with all company Health, Safety and Environment as well as Work Permit, policies and procedures

• To prepare, compile and issue various reports e.g. status reports, weekly, two weekly plans compliance report and monthly maintenance department report, maintenance performance indices report , PSV’S backlog/ statistics reports etc.

Main Challenges:

• To improve the awareness and understanding of the MAXIMO system functions so that current problems of under utilization are cured and productivity is improved.

Minimum Requirements:

The Planning Engineer shall meet the below requirements at the minimum:

• Shall be an Engineering graduate in any one of the three disciplines Mechanical, Electrical and Control & Instrumentation.

• Shall have adequate experience in the field of planning in maintenance related works of which four (04) years must be in the field of maintenance planning as planning engineer.

• Well versed with all planning tools likes Visual planner, Primavera, etc..

• Good command over English language and good in professional report drafting.

• Oil and Gas experience is preferred.

• Should have exposure to CMMS system like SAP/ Maximo.

• Shall have adequate experience in the field of planning in maintenance related works of which four (04) years must be in the field of maintenance planning as planning engineer.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Projects Engineer

-

Projects Engineer

Abu Dhabi, UAE

Worked Performed:

• Plans, directs and supervises the activities of the assigned & involved personnel/contractors. 

• Ensures the implementation of projects in accordance with VAP as deemed necessary. 

• Co¬ordinates effective implementation throughout all stages of Project implementation, i.e. engineering, procurement, fabrication, construction, hook-up commissioning and hand over to the end-user/operating authority. 

• Reviews Projects scope of requirements and documentation/packages, develops implementation strategies, follows-up implementation and ensures that all commitments in terms of schedule/budget, performance, guarantee and quality are attained throughout various phases of the project until final hand over to operating Authority. 

• Acts as assistant to the Team Leader and a focal point of contact with Contractors, Engineering Consultants/PMC on matters related to the ID, MTD Management/ Implementation of the project. 

• Coordinate with team of Discipline Engineers within E&P team, DED, HSED & Site as deemed necessary for successful implementation / execution of the Project. Ensures adherence to the Company's safety standards and procedures during all stages of implementation of Projects & in specific by all personnel contractors engaged in project work sites. 

• The coordination also includes in-house / external consultants during Access/Select/FEED stage studies of the project

Minimum Requirements:

• B. Sc. degree in Civil / Mechanical / Electrical/ Instrumentation Engineering

• Minimum 8 years experience in the design / construction work of oil and gas topside projects out the which 5 years in offshore Oil & Gas projects.

• Must be experienced with pre-contract and post contract activities of multidisciplinary large scale projects from inception to commissioning.

• Knowledgeable and experienced in HSE issues.

• Proficiency in MS Office & MS Project.

• Proficiency in reading, writing and speaking English.

• Preferably certified Project Management Professional or equivalent.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Rotating Machinery Engineer

- Thursday, May 14, 2015

Rotating Machinery Engineer

Abu Dhabi, UAE

Worked Performed:

• Optimizes the availability, reliability and service life of major Rotating Machinery (gas turbines, turbo- compressors, pumps and diesel engines) at Company operation sites such as USSC, ZWSC, ZCSC, Das Island and Al Hyleh Barge. 

• Determines the required Maintenance Strategy for major Rotating Machinery to achieve target in a very cost-effective manner. 

• Prepares scheduling and implementation programs of major Rotating Machinery overhauls and inspections as required.

Minimum Requirements:

• B. Sc. Mechanical Engineering.

• 6 years post qualification engaged as a field engineer  associated with major Rotating Machinery operation/maintenance, and possessing problem analysis and trouble shooting capabilities.

• Very good knowledge of English Language.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Reliability Engineer (Mechanical)

-

Reliability Engineer (Mechanical)

Abu Dhabi, UAE

Worked Performed:

• Provides technical expertise and assistance to technical and operational divisions/departments on all matters related to reliability engineering, reliability assessment, reliability monitoring for all mechanical equipment.

Minimum Requirements:

• Bachelor Degree in Mechanical Engineering discipline or equivalent and a postgraduate course in Reliability Engineering.

• 5 - 6 years' experience in Oil/Petrochemical Industry with background of modern maintenance systems.

• Good Knowledge of written and spoken English.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

A/C & Mechanical Maintenance Engineer

-

A/C & Mechanical Maintenance Engineer

Location: Abu Dhabi

Basic Function:

• Oversees maintenance of a various type of mechanical systems related to building services such as HVAC, elevators, pumps and the installation, operation, additions/alterations and modifications of HVAC systems, and other related mechanical equipment. 

• Prepares technical feasibility and equipment pertaining to Company owned and leased properties which include all office building and residential units In & outside Abu Dhabi City, Company HQ, Shaikh Khalifa Energy Complex (SKEC, Sas Al Nakhl Complex, The Petroleum  Institute (PI), ATI at Al Shawamekh and workshops, Satellite Clinics such as Habshan, Bu ass, Asab, Medinat Zayed and various other properties (owned/leased) in western region and other region in the Emirates of Abu Dhabi. 

• Activities also include coordination with Civil Projects Division for various upcoming projects

Minimum Requirements:

• B.Sc. Degree in Mechanical Engineering or equivalent

• 8 years professional experience in an A/C and mechanical maintenance works, preferably relating to multi-storied buildings

• Good knowledge of English.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Electrical & Instrument Planning Engineer

- Wednesday, May 13, 2015

Electrical & Instrument Planning Engineer 

Das Island, Abu Dhabi, UAE

Basic Function:

• To provide Planning and Scheduling functions in the s and Electrical Discipline and support the Maintenance Division for the 3 Company LNG Trains on Das Island. All works to be planned in a cost effective manner in line with the Plant Maintenance Policy.  Ensure all work is carried out in safe manner to company standards, codes and practices.

Worked Performed:

• Plan and Schedule Work Orders as per the Preventive Maintenance policy of Company.

• Plan, Resource, Schedule the Corrective Maintenance Work Orders in SAP and ensure timely and safe execution as per Company work procedures and policies.

• Update SAP Data Base as applicable to revise planned man-hours, Equipment Bill of Materials, Equipment Technical Data, etc on a continual basis.

• Provide technical planning support for Maintenance Division Engineers by producing specific work plans in MS Projects / Primavera.

• Produce Daily Maintenance Work Planning Report detailing the Work Orders planned for the day. Provide feedback on the works in progress.

• Ensure that all work orders are closed out in SAP with the appropriate Fault Code Statistics and History reporting as per the Maintenance Policy.

• Produce a Monthly Report detailing the works carried out during the month and represent statistics on a graphical basis. (Backlog, Productivity and Efficiency KPI)

• Plan, Pre Engineer, Schedule and Execute Mini Turnarounds for packaged units like Gas Turbines (HGP, CITP, CI); Nitrogen Plants, Air Compressor Units etc. 

• Produce Tick Lists, Work Lists Final Work Pack for Mini Planned Turnarounds.

• Produce, follow up and track all constrained WONs like Operational Release, Awaiting Materials etc.

• Oversee the activities of assigned personnel in the Electrical section to execute planned and routine maintenance on plant equipment.

• Liaise with Operational Division to ensure minimum disruption to the plant facilities and provide feedback on ongoing works on a regular basis.

• Assist Major Turnaround Planning Team in execution of works in a Major Turnaround on the LNG Plant.

• Use CMMS as a tool to plan work execute and update technical information for analysis and continuous improvement.

• Assist in Implementation of RCM, SRCMO, HSECES, RBI, and other Maintenance Improvement initiatives.

• Assist to Troubleshoot plant problems, recommend engineering solutions. 

• Prepare component/equipment repair procedures.

• Produce end of Job Report detailing all required information including cost analysis, Planned and actual man-hours comparison, recommendations for future etc.

• Mentor and develop UAE nationals. Identify training needs for site workforce.

• Assist in preparation of Operating/Capital budgets and exercise control within close limits.

• Participate in HAZOPs, technical reviews, Risk Assessment, Safety Audits, Modifications.

• Use new technology advise to optimize resource utilization.

Minimum Requirements:

• Aged 35-45.

• BSc in Electrical Engineering or equivalent.

• 15 years experience in maintenance and application of electrical equipment associated with the oil refining or Petro-Chemical industry, minimum 10 of which should have been in a supervisory capacity.

• Experience of electrical condition monitoring will be an added advantage.

• Good knowledge of spoken and written English, with capability of writing technical reports.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Lead Area Mechanical Engineer (Maintenance)

-

Lead Area Mechanical Engineer (Maintenance) 

Das Island, Abu Dhabi, UAE

Basic Function:

• To direct coordinate and plan site mechanical maintenance work on the 3 train LNG Plant and Power station cost effectively in line with the Plant Maintenance Policy.  Ensure all work is carried out in safe manner to company standards, codes and practices.  Oversee a work force of 100 employees.

Worked Performed:

• Oversee the activities of assigned personnel in the Mechanical section to execute planned and routine maintenance on plant equipment.

• Use CMMS as a tool to plan work execute and update technical information for analysis and continuous improvement.

• Troubleshoot plant problems, recommend engineering solutions.  Provide technical reports to Management.

• Raise Purchase and Vocabulary addition request for plant materials/spares.

• Prepare component/equipment repair procedures.

• Liaise with Vendors/Specialist agents to employ specialist services.

• Mentor and develop UAE nationals.

• Identify training needs for site workforce.

• Prepare Operating/Capital budgets and exercise control within close limits.

• Participate in HAZOPs, technical reviews, Risk Assessment, Safety Audits.

• Use new technology advise to optimize resource utilization.

Minimum Requirements:

• Aged 40-45.

• B.Sc. in Mechanical Engineering or equivalent.

• 15 years experience in maintenance and application of Mechanical equipment associated with the oil refining or petro-chemical industry, minimum 10 of which should have been in a supervisory capacity.  Experience of Technical Services will be an added advantage.

• Good knowledge of spoken and written English with technical report writing skills.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Senior Instrument Engineer / Specialist

-

Senior Instrument Engineer / Specialist

Das Island, Abu Dhabi, UAE

Basic Function:

• Acting as the Technical Authority in Instrument discipline and have been familiar/responsible for the upkeep of the types of equipment, machinery and management systems found in LNG and Petrochemical/Gas processing facilities.

Worked Performed:

• To demonstrate leadership and commitment in promoting the Company HSE corporate vision in all HSE matters, promoting the correct behaviors and development and use of relevant procedures.

• Financial management - Act as discipline champion for the review of all related capital and revenue expenditure proposals, contributing to the development of the annual budget cycle and following through the planning and implementation phase.

• Contracts and Procurement - As necessary, to develop, provide and review scopes of work and technical content for contracts and procurement.

• To act as discipline focal point for championing and promoting improvements in asset reliability and availability through improvements to management systems and processes, working practices and equipment studies including obsolescence reviews and incident investigations.

• To act as the discipline Technical Authority and focal point for engineering design and modification reviews, participating in Hazard and Hazop reviews as required.

• To provide leadership in the upkeep, development and improvement of the maintenance management system for the core discipline, ensuring adherence to processes and procedures and undertaking departmental performance audits on a regular basis.

• To act as discipline mentor and champion for UAE and other staff, encouraging and providing stimulus to their ongoing development.

Minimum Requirements:

• Aged: Maximum 50 Years.

• BSc in Instrumentation & Control Engineering or equivalent.

• 15 years or more experience in maintenance and application of Instrument equipment associated with the oil refining or Petro-Chemical industry. Experience of Technical Services and Maintenance Procedures writer will be an added advantage.

• Excellent knowledge of spoken and written English.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Wireline Supervisor

-

Wireline Supervisor

Abu Dhabi, UAE

Basic Function:

• Directs and controls Contractor's onshore activities involved in carrying out site Wire-line (slick line) operations to provide Reservoir and Petroleum Engineers with detailed information on reservoir behavior during production or injection. 

• Plans and programmes Wire-line (slick line) activities to ensure all Petroleum Engineering & Field Development Divisions' requirements are met. 

• Coordinates with concerned personnel/ contractor for Wire-line (slick-line) units' & Wire-line (slick line) tools maintenance/ upkeep/ certification.

• Develops, manages, & maintains inventory of down-hole equipment/ tools, performance assessment and replacement. 

• Witness's special Wire-line (slick line) jobs conducted by contractors and interpret/ validates the results. 

• Assists superiors & prepares tender specifications, evaluates received bids and makes recommendations for Wire-line (slick line) contracts. 

• Ensures adherence to Company's Health, Safety & Environmental rules, regulations, and technical standards.

• (Work covers onshore contractor workshop(s) & coordination for Wire-line (slick line) interventions on offshore oil producers, water injectors, and gas (production / injection) wells in Umm Shaif Field).

Minimum Requirements:

• Bachelor Degree in Petroleum Engineering or equivalent.

• 5 - 6 Years experience in Wire-line (slick-line) / logging activities of which at least 3 years in offshore supervisor capacity with knowledge of PC operation.

• Very good knowledge of English Language.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Research / Laboratory Engineer (Chemical Engineering) (Academic)

-

Research / Laboratory Engineer (Chemical Engineering) (Academic)

Abu Dhabi, UAE

Department Description:

• A Research Engineer position is currently available in the field of Process Simulation of gas-sweetening units at the Company in Abu Dhabi. The successful candidate will develop further a chemical process simulator to use to investigate the effects of high H2S and CO2 concentrations and unconventional contaminants in the new gas streams on the operations of Company (ADNOC Group operating company) existing and new gas plants. The position is part of an industrial project funded by Gas Processing & Materials Science 

Brief Posting Description:

• Research Centre (GRC)

Minimum Requirements: 

• Candidates should have a Bachelor or Master’s Degree in chemical engineering (or related area) from a reputable university with expertise in gas-sweetening process simulation and good programming skills in particular using MATLAB, Visual Basic, and/or Java. Experience with the simulator ProMax is a must. There are tremendous opportunities for research collaboration with the Company’s industrial stakeholders, as well as the affiliated universities. 

We are particularly interested in candidates with the following qualities: 

• Strong knowledge and research experience in Process simulation in particular with ProMax 

• Good Programming skills

• Ability to work independently as well as collaboratively 

• Excellent oral and written communication skills 

• Good track record of research publications 

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

OJT (Maintenance)

- Monday, May 11, 2015

OJT (Maintenance)

Location: Das Island 

Worked Performed:

Responsible for the development and implementation of training and systems to support the Company Competence Development Programme for Technicians. He will be required to assist in the design and production of suitable training support material to ensure that the Competence Development Programme quality standards are maintained and that there is uniformity in the delivery of high standards of training in On Job Training. The successful candidate should also be able to:

• Train the Developees (Technicians) in both theoretical and practical activities as defined within the ADNOC Group/COMPANY Competency frame work and plan and follow-up the work based activities appropriate to the development of their skills and knowledge. 

• Report to Maintenance Training Team Leader on the Progress, Attendance and Achievement of persons under training.

• In collaboration with other TC staff, design and produce a comprehensive system for ensuring that the practical competence of the workforce is developed to the required standards

• In close cooperation with the Developees, Line Supervisors and other appropriate staff, assist in developing and producing Personal Development Plans and Real Work Tracking records for Developees on time.

• Deliver practical courses as required, to enhance practical skills and build upon theory

• Conduct GAP analysis exercises and liaise with Line Divisions and other TC staff to produce and implement action Plans.

• Monitor/track the progress Developees/Trainees against development plans and assist in developing and implementing remedial action plans in collaboration with Line Divisions and produce necessary reports as required.

• Observe and ensure that the quality of Coaching, On-Job-Training and Assessments are in accordance with standard process, policy and procedures 

• Produce Reports & Deliver Presentations as requested by Management

• In consultation with Line, closely monitor the rotation/attendance, and the effectiveness of training of Developees.

• Maintain good working relationship with other staff in L&D and Line Departments

• Perform any other related task as advised by Maintenance Training Team Leader/MoT.

Minimum Requirements:

• Aged 35-51

• B Sc. or equivalent

• Completion of an approved programme of practical training, such as Apprenticeship or Professional Institution/ Engineering Training Body / Armed Services / accredited training programme and / or SVQ/NVQ Accreditations.

• Very good standard of written and spoken English Language

• Five years experience of the Oil and Gas Industry, with a further six years related industrial experience

• Must be computer literate

• Good interpersonal skills

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Technical Trainer (Operations)

-

Technical Trainer (Operations)

Das Island, Abu Dhabi, UAE

Basic Function:

• Responsible for the development and implementation of training and systems to support the Company Competence Development Programme for Process/Operation Engineers, Operations Controllers and Operators. He will be required to assist in the design and production of suitable training support material to ensure that the Competence Development Programme Quality Standards are maintained and that there is uniformity in the delivery of high standards of training which includes both ‘on and off the job training’. 

Worked Performed:

• Coach the Developees (Process/Operation Engineers, Operations Controllers and Operators) in both theoretical and practical activities as defined within the ADNOC Group/Company Competency frame work and plan and follow-up the work based activities appropriate to the development of their skills and knowledge 

• Report to TTTL on the Progress, Attendance and Achievement of persons under training.

• In collaboration with other L&D Staff, design, produce and deliver discipline-related Short Courses.

• Support Training Centre team in their delivery and assessment of the practical competence of the workforce.

• Deliver practical courses as required, to enhance practical skills and build upon theory.

• Conduct GAP analysis exercises and produce action Plans.

• Observe and monitor Line competence checks of individual Developees.

• Track the progress of Developees and produce reports as required.

• Monitor performance of Developees/Trainees against plans and take action to remedy problems in an effective and timely manner. 

• Produce Reports & Deliver Presentations as requested by Management

• In close cooperation with the Developees, Line Supervisors and other appropriate staff, develop and produce Personal Development Plans and Personal Development Records for Developees.

• Maintain good working relationship with other Company staff

• In consultation with Line, monitor the rotation/attendance of Developees.

Minimum Requirements:

• Aged 36-51

• B. Sc. or equivalent

• Completion of an approved programme of practical training, such as Apprenticeship or Professional Institution/ Engineering Training Body / Armed Services / accredited training programme and / or SVQ/NVQ Accreditations.

• Very good standard of written and spoken English Language

• Five years experience of the Oil and Gas Industry, with a further six years related industrial experience

• Must be computer literate

• Good interpersonal skills

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Simulator Trainer

-

Simulator Trainer

Das Island, Abu Dhabi, UAE

Basic Function:

• Responsible for the Responsible for the development and implementation of training and systems to support the Process Simulator Training for Senior Field Operator/Operation Controller and system engineer He will be required to assist in the design and production of suitable training support material and OTS scenarios to ensure that there is uniformity in the delivery of high standards of OTS training. 

Worked Performed:

• Conduct and administer OTS ( Operator Training Simulator) training for SYSTEM engineers, operation team leaders and shift supervisors on various aspects of Plant operations like Start up, Normal Shutdown, Steady state operation ( monitor and control of plant parameters ), upsets and troubleshooting, elaborate more in root cause analysis (RCA),  emergency shutdown and emergency depressurization

• Maintain OTS training records/database  and documentation

• Run OTS model and record all the discrepancies for future up gradation of OTS.

• Liaise with operation for the release candidates and prepare training need analysis.

• Create OTS training performance measurement and evaluation TPMs/Malfunctions /Scenarios   for monitoring the trainees’ performance and future reference.

• Track the progress of candidates and produce reports as required

• Liaise with engineering division for any OTS upgrading or modification related issues.

• Conduct Plant courses for the Operations staff.

• Conduct Process induction for new staff.

• Conduct OTS familiarization course for the Operations staff.

• Maintain good working relationship with other Training Centre staff

Minimum Requirements:

• Aged 35-51

• B. Sc. Chemical engineering or equivalent.

• Completion of an approved program of industrial practical training, such as Apprenticeship or Professional Institution/ Engineering Training Body / accredited training programme and / or SVQ/NVQ Accreditations.

• Very good standard of written and spoken English Language.

• Six years’ experience of the Oil and Gas Industry, with a further minimum 4 years related industrial simulation experience.

• Must be computer literate.

• Good interpersonal skills.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Operations Engineer

- Sunday, May 10, 2015

Operations Engineer

Abu Dhabi, UAE

Basic Function:

• Liaises with field/terminal operations divisions to provides technical support on matters related to operational strategies, chronic problems, medium and long term plans, maintenance and inter-field operating  procedures, as applicable to his engineering discipline. 

• Participates in technical/economical studies to provide viable solutions/options in support of decision making process at the Operations Functional management level. Identifies technical solutions and/or new technologies that are necessary to improve operating efficiency and/or enable future development projects.

Worked Performed:

• Participates in the development of strategies in support of the Operations business plans, master field plans and field facilities plans. Includes collecting and analyzing data for technical and/or economical studies, drafting recommendations for viable alternatives, etc.

• Prepares technical background and summaries related to specific operational issues, as assigned. Issues may include highlighting problems in a particular equipment/system, investigating water injection failure rate, etc.

• Participates in technical and economical studies on major spending areas/items related to facilities operations, maintenance or development. This may include reviewing spare parts for major equipment, conducting techno economic study on overhead line maintenance, etc.

• Contributes to the definition of projects TOR and conceptual designs, to ensure that the operational experience and maintenance policies are captured in the design of major field development work.

• Identifies and participates in the development of new technologies/solutions to improve operations practices. This includes evaluating the new technologies, selecting and recommending viable and appropriate solutions for implementation.

• Participates in the commissioning and implementation of field trials. Includes monitoring testing activities, evaluating performance and operational results, drafting evaluation report and recommendations.

• Updates technical information, guidelines and operating manuals covering various aspects of production operations. Includes updating technical manuals of various equipment using manufacturers’ recommendations and operations’ feed back.

• Assesses present procedures and recommends changes to ensure the safe and efficient operation of equipment.

• Keeps abreast of technological development in the field of operation engineering. Attends conferences, seminars and reviews technical periodicals.

• Identifies opportunities to improve efficiency and reduce costs.

• Participates in the training and development of assigned UAE national employees. Includes monitoring and reporting on progress and counseling employees, as required.

• Knows the Company health, safety and environmental policy, procedures, regulations and objectives as they relate to his area of responsibility, and ensures that they are effectively implemented in his domain.

Key Performance Indicators:

• Sound analysis of data including analyses of operational test results.

• Viability of identified alternatives and acceptability of recommendations.

• Presentation of agreed options for review and approval by senior management.

• Feedback from colleague in assigned study group or a CAT team.

• Approach followed in highlighting the problem and role played in implementation of the study results and recommendations

• Sound analysis of data including analyses of operational test results.

• Viability of identified alternatives and acceptability of recommendations, e.g. advising on items to be stocked and stock level, coordinating with other OPCOs on standardization of equipment and spares

• Sound operations input and representing throughout the project life cycle. Inception to commissioning and start up.

• Well-defined operations strategy for assigned projects’ and consistency with existing operations.

• Ability to research and evaluate specialized solutions/technology of multi disciplinary nature.

• Good understanding of related systems, processes and operations.

• Ability to advise field/terminal personnel on the wider application of the technology throughout the Fields, once the technology/solution is approved.

• Promotion and maintenance of consistency in operating and maintenance procedures and guidelines,

• Adoption and promotion of best operational practices throughout all field areas.

• Up to date with the state of the art in operations technologies.

• Embrace new technology and find practical applications for it. 

• Opportunities for improvements are identified and implemented

• Engineers are trained and developed and given ample opportunity to participate in the section’s activities.

• Safe working at all times.

• No lost time through accidents.

Minimum Requirements:

• B.Sc. in Mechanical, Petroleum or Production Engineering.

• 6-8 years’ experience in oil and gas industry.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.

Tags: Projects & Engineering

Material Corrosion Engineer

- Thursday, May 7, 2015

Material Corrosion Engineer

Abu Dhabi

Basic Function:

• Provides technical knowledge and assumes responsibility for areas related to Corrosion Monitoring and Control in the Material and Corrosion Section. 

• Assists in the review of the metallurgy of the equipment and piping of refineries units as and when required and makes recommendations for up grading as required.

• Reviews the operating conditions to assess and monitor corrosive conditions and evaluates the material performance in corrosive streams.

• Reviews the metallurgy for the modifications and major projects. 

• Updates procedures and specifications related to corrosion Management & Inspection activities and recommends repairs/ operating parameters to extend the life of equipment and piping.

• Carries out material and corrosion testing and research activities failure analysis and failure investigations in order to enhance safety and integrity of the plant. 

• Performs the corrosion activities in TRC, and provides support to refineries as and when required. 

• Updates/ Prepares the records for the corrosion laboratory activities

Minimum Requirements:

• B. Sc. in Metallurgical, Mechanical or Chemical Engineering with qualification in corrosion engineering.

• 5 Years’ experience in process and utilities of Petroleum Refineries. 

• Chemical Process plants, Petrochemical plants of which 3 years as specialist in Corrosion Engineering preferably at R&D centre.

Kindly send your updated CV to fivecont@emirates.net.ae and mention in the subject the position you are applying for or click here to apply.